MATERIALS SCIENCE AND TECHNOLOGY 2002 Vol.10 Issue 3

Journal Articles

Laws/Policies/Regulations

Companies/Products

Title, abstract, keywords:

Combined Search Advanced Search

Pay per View through On Demand Search

25 Records Found

I could not find the article I request

材料科学与工艺
MATERIALS SCIENCE AND TECHNOLOGY

Year 2002 Volume 10

Issue 3

Effect of the composition of start materials on thermal conductivity of bulk graphite (原料配比对石墨材料热传导性能的影响)

QIU Haipeng, GUO Quangui, SONG Yongzhong, DI Gengtai, LIU Lang

.................. page:225-230

Mechanical alloying of hypereutectoid Ti-Cr alloys (过共析Ti-Cr合金的机械合金化)

XIAO Pingan, QU Xuanhui, LEI Changming, QIN Mingli, ZHU Baojun, GAO Jianxiang, HUANG Peiyun

.................. page:231-236

Modelling of recrystallization behaviors and the evolution of γ-grain size during grain-refining rolling of super-steel (超级钢细晶轧制过程中再结晶及γ晶粒尺寸的模拟计算)

XU Yunbo, YU Yongmei, LIU Xianghua, WANG Guodong

.................. page:237-241

Microstructure and mechanical properties of aluminum alloy 5182 ingot cast by electromagnetic casting (电磁铸造5182铝合金锭的组织与性能研究)

CAO Zhiqiang, ZHANG Xingguo, JIN Junze, JIA Fei, HAO Hai

.................. page:242-246

A study on liquid phase sintering process of hard cladding materials (硬质覆层材料的液相烧结工艺研究)

WANG Yongguo, CAO Yuan, LI Zhaoqian, ZHANG Tao, LIU Futian

.................. page:247-250

A study on the synthesis of ZnO nanoparticles by supercritical fluid drying (超临界流体干燥法制备纳米ZnO的研究)

ZHANG Jingchang, GAO Zuo, CAO Weiliang, HU Zhihao

.................. page:251-255

Simulation analysis of dynamic process in electron beam welding (电子束焊接动态过程仿真分析)

ZHANG Haiquan, LI Liuhe, ZHANG Yanhua, LI Guang, XIA Lifang, SHI Jiangang

.................. page:256-259

A morphological study of modified PU/PMMA semi-IPNs and nanocomposites with BaTiO3 (改性PU/PMMA半IPNs与BaTiO3纳米复合体系相容性研究)

TANG Dongyan, CAI Weimin, ZHOU Derui, ZHAO Liancheng

.................. page:260-262

An experimental study on strain rate-dependent tensile properties of alumiunium L2 (工业纯铝L2应变率相关的拉伸力学性能研究)

HUANG Wen, ZHOU Yuanzuo, MA Gang, XIA Yuanming

.................. page:263-267

Effect of superfine-graining on mechanical properties of superalloy GH4169 (超细晶化对高温合金GH4169性能的影响)

LV Hongjun, JIA Xinchao, ZHANG Kaifeng, YAO Caogen

.................. page:268-271

Preparation and characterization of CdSxSe1-x(0＜x＜1) nanocrystallites doped silicate glasses (硫硒化镉微晶玻璃制备和非线性光学性质研究)

XIANG Weidong, SUN Xiaojun

.................. page:272-276

Effect of hardening mode of material on springback-simulation accuracy of bending (材料硬化模式对弯曲回弹模拟精度的影响)

LI Xuechun, YANG Yuying, WANG Yongzhi, BAO Jun, LI Shunping

.................. page:277-280

Finite element analysis of temperature field during quenching by heat-magnetic coupling with the consideration of phase transformations (热磁耦合下淬火考虑相变的温度场有限元分析)

LIU Meihong, LI Zhenhua, CHEN Junruo, ZHOU Rong, CAI Renliang

.................. page:281-286

Power spinning deformation of thin-walled cylinders with longitudinal inner ribs (带纵向内筋薄壁筒形件强旋成形)

XUE Kemin, JIANG Shuyong, KANG Dachang

.................. page:287-290

Investigation on the decomposition behaviour of PBT in supercritical methanol (超临界甲醇中PBT的分解行为研究)

MENG Linghui, HUANG Yudong, LIANG Zhihua, CHAI Tianchonghong, SI Shigongfude

.................. page:291-294

Influence of RF magnetron sputtering processes on morphology of TiNi(1-x) Cux alloy films (RF磁控溅射工艺对TiNi(1-x)Cux合金薄膜组织形貌的影响)

LI Yadong, CUI Dakui, LUO Suhua

.................. page:295-298

Polymorphic behavior of syndiotactic polypropylene with different heat histories (不同热历史间规聚丙烯的多晶型现象)

HE Suqin, ZUO Hongjing, ZHU Chengshen, WANG Liuyang

.................. page:299-301

Effect of RE modification and heat treatment on mechanical properties of high C-Cr cast steel (稀土变质及热处理对高碳铬铸钢力学性能影响)

YU Shengxue, DUAN Muxin, ZHANG Ruijun, LIU Jianhua

.................. page:302-305

A study on the efect of trace contents of Sc and Zr on microstructure and properties of Al-Mg alloys (微量Sc和Zr对Al-Mg合金组织和性能影响的研究)

BAI Zhenhai, LUO Binghui, FAN Yunqiang, XIE Shaojun

.................. page:306-309

Effect of coating quantity of fluxes on weld penetration depth in A-TIG welding (活性剂涂敷量对A-TIG焊熔深影响的研究)

LIU Fengyao, LIN Sanbao, YANG Chunli, WU Lin

.................. page:310-313

Preparation of SrAl2O4:Eu2+,Dy3 +photoluminescence enamel coating (SrAl2O4:Eu2+,Dy3+光致发光搪瓷涂层的制备)

ZHANG Xiyan, GUO Zuo, BAI Chaozuo, WANG Xuerong, CAO Zhifeng

.................. page:314-317

Microstructure and secondary phase particles of hot dipped Zn-0.15 % Ni coating on low carbon steels (低碳钢热浸Zn-0.15%Ni合金镀层组织及第二相粒子)

XU Qiaozuo, LU Jintang, PEI Zuo, CHEN Jinhong, KONG Gang

.................. page:318-321

A study on the hydration process and its mechanism of ZnO-Al2O3-P2O5 glasses (ZnO-Al2O3-P2O5玻璃水化过程及机理的研究)

LIU Shiquan, TAO Wenhong, MA Xiaoying, YUAN Zuo, LI Guoxiang

.................. page:322-325

Fabrication of functionally graded material with continuous change of composition by co-sedimentation (用共沉降法制备组分连续变化的梯度材料)

YANG Zhongmin, ZHANG Lianmeng

.................. page:326-330

Effect of heat treatment on phase transformation and microstructure of TiAl-based alloys (热处理对TiAl基合金相变和显微组织的影响)

PENG Chaoqun, HUANG Boyun, HE Yuehui

.................. page:331-336

Recommended Journals

Oriental Forum
青岛大学
1005-7110

Modern Agricultural Machinery

1674-5604

Urban Planning Forum
同济大学
1000-3363

Materials Science and Technology
中国材料研究学会哈尔滨工业大学
1005-0299

Household Appliance Technology
中国家用电器研究所中国轻工协会家用电器工程学会
1672-0172

Chinese Journal of Energetic Materials
中国工程物理研究院
1006-9941

Journal of Southwest University for Nationalities(Natural Science Edition)
西南民族大学
1003-2843

Transactions of Beijing Institute of Technology
北京理工大学
1001-0645

Measurement & Control Technology
北京长城航空测控技术研究所
1000-8829

Journal of Social Science of Jiamusi University
佳木斯大学
1007-9882