Materials Science and Technology 2015 Vol. Issue 4

Journal Articles

Laws/Policies/Regulations

Companies/Products

Title, abstract, keywords:

Combined Search Advanced Search

Pay per View through On Demand Search

23 Records Found

I could not find the article I request

材料科学与工艺
Materials Science and Technology

Year 2015

Issue 4

Study on the law of isothermal foaming of Ti-6Al-4V foams fabricated by gas entrapment (基于气体捕捉法的泡沫Ti-6Al-4V等温发泡规律研究)

WANG Zhelei, REN Xueping, HOU Hongliang, WANG Yaoqi, LU Wei, School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing Aeronautical Manufacturing Technology Research Institute, School of Mechanical, Electrical & Information Engineering, Shandong University

.................. page:1-6

feng mian tu pian shuo ming (封面图片说明)

WANG Zhelei, REN Xueping, HOU Hongliang

.................. page:6

Current status and trend of ultra-high strength hull structural steels (超高强度船体结构钢的开发现状与趋势)

LEI Xuanwei, HUANG Jihua, CHEN Shuhai, ZHAO Xingke, School of Materials Science and Engineering, University of Science and Technology Beijing

.................. page:7-16

Study of monitoring CF3052 /5224 composites molding process by optical fiber Bragg grating (光纤布拉格光栅监测CF3052/5224复合材料成型过程研究)

ZHANG Jindong, YU Haitao, LI Long, WANG Qingyou, WEI Peng, ZHAO Yan, School of Materials and Engineering, Beihang University, Harbin Aircraft Industry Group Company Limited, School of Instrumentation Science and Opto-electronics Engineering, Beihang University

.................. page:17-22

A study of nanocrystalline zinc electroplating technology for steel wire rods in sulfate solutions (钢线材硫酸盐体系电镀纳米晶锌镀层工艺研究)

LI Qingyang, LIU Lihua, FENG Zhongbao, SUN Jie, AN Maozhong, Jiangsu Fasten Group Company, Limited, School of Chemical Engineering and Technology, Harbin Institute of Technology

.................. page:23-29

Computational analysis of relationships between mechanical properties and microscopic valence electronic structures of microalloy steel (微合金钢价电子结构与力学性能关联的计算分析)

WANG Xinglong, PENG Yan, National Lab of the Metastable Materials Technology and Science, Yanshan University

.................. page:30-35

Stamping springback and springback compensation of the automobile central channel (汽车中央通道冲压回弹及其补偿研究)

LIU Xiaojing, GE Xijun, LIU Penghui, ZHOU Wenhao, WANG Zhe, College of Materials Science and Engineering, Harbin University of Science and Technology

.................. page:36-41

Design of choked flow angle of die and distribution of physical field of copper flat line produced by continuous extrusion (连续挤压铜扁排的阻流角设计及物理场分布)

ZHAO Hongjin, LI Taotao, CHAO Jie, YANG Zhengbin, HU Yujun, School of Materials Science and Engineering, Jiangxi University of Science and Technology

.................. page:42-47

Numerical simulation of heat transfer by vertical Bridgman method of CaF₂ single crystals growth (垂直Bridgman法生长CaF₂单晶传热过程的数值分析)

YAO Jing, ZHOU Hai, LU Yimin, WAN Hancheng, School of Materials Science and Engineering, Beijing University of Chemical Technology, School of Materials Science and Engineering, Beijing Institute of Petrochemical Technology

.................. page:48-53

Effect of pearlite on the tensile fracture process of ZG120Mn13 steel (珠光体对ZG120Mn13钢拉伸断裂过程的影响)

DING Zhimin, FU Neng, FENG Rui, College of Materials Science and Engineering, Dalian Jiaotong University

.................. page:54-58

Impacts of multi-point incremental forming process parameters on plate thickness thinning (工艺参数对多点复合渐进成形厚度减薄的影响)

CAI Gaipin, ZHOU Xiaolei, XIONG Yang, MENG Pengyu, School of Mechanical and Electrical Engineering, Jiangxi University of Science and Technology, School of Material Science and Engineering, Jiangxi University of Science and Technology

.................. page:59-63

Effect of clustering on the mechanical properties of whisker reinforced Al matrix composites by hot extrusion of powder (团簇对粉末热挤压铝基复合材料力学性能的影响)

MA Guojun, DING Yutian, JIN Peipeng, WANG Dongqiang, State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals, School of Mechanical Engineering, Qinghai University

.................. page:64-69

Computational studies on coating uniformity influenced by baffle in hot dip galvanizing process (热镀锌过程挡板对镀层均匀性影响的模拟研究)

FU Yujing, ZHANG Hongmei, LI Peixing, ZHAO Hongyang, School of Material and Metallurgy, University of Science and Technology Liaoning, The Technology Center of Angang Steel Company Limited

.................. page:70-74

Weld cracking analysis of 12Cr1MoV header and branch pipe (12Cr1MoV联箱与支管焊缝裂纹分析)

ZHANG Min, XU Aiyan, WANG Qiang, School of Materials Science and Engineering, Xi’an University of Technology

.................. page:75-80

The thermal decomposition kinetics of poly( vinyltri-( phenylethynyl) silane) s (聚乙烯基三苯乙炔基硅烷的热分解动力学)

TAN Dexin, WANG Yanli, TANG Ling, CHEN Bihua, XING Honglong, School of Chemical Engineering, Anhui University of Science and Technology, School of Materials Science and Engineering, Anhui University of Science and Technology

.................. page:81-86

Effects of cone surface profile of mandrel on residual stress distribution of cold expansion strengthening of hole (芯棒锥面结构对孔冷挤压强化残余应力场的影响)

ZHU Youli, HOU Shuai, WANG Yanli, BIAN Feilong, GUAN Yu, Department of Equipment Remanufacture Engineering, Academy of Armored Force Engineering, Shenyang Aircraft Design Institute, China Aviation Industry Corporation

.................. page:87-92

Influence of deformation temperature on microstructures and mechanical property of bainitic steel (变形温度对贝氏体钢组织性能的影响)

YANG Yu, CHEN Xin, JIN Jiyong, WANG Yinghai, Technology Center, Angang Steel Co., Ltd.

.................. page:93-98

Synthesis of kaolinite intercalated with alkyl imidazolium ionic liquids and characterization (烷基咪唑离子液体插层高岭石的制备与表征)

HUANG Yanan, YAN Zhifei, DU Xiaolong, YANG Xiande, WANG Junxia, WU Xiuling, Faculty of Material Science and Chemistry, China University of Geosciences

.................. page:99-104

Microstructure of dissimilar material joint with T2 copper and steel 304 for plasma arc welding (铜/钢异种材料等离子弧焊接头显微组织分析)

PENG Chi, CHENG Donghai, CHEN Yiping, HU Dean, Aviation Manufacturing and Engineering College, Nanchang Hangkong University

.................. page:105-110

Influence of mechanochemical effect on physical properties of boiler bottom slag (机械力化学效应对锅炉底渣理化特性的影响)

CAO Jun, FANG Ying, FAN Rendong, WAN Yongmin, QIAN Hui, ZHOU Yonghua, ZHU Wanxin, Materials Science and Engineering, Nanjing University of Technology, Jiangsu Electric Power Design Institute

.................. page:111-114

Study on surface characteristic of T800H carbon fiber and hygrothermal performance of T800H/BA9918 composite (T800H碳纤维表面特性及T800H/BA9918复合材料湿热性能研究)

WANG Yingfen, PENG Gongqiu, LI Guoli, XIE Fuyuan, LIU Yong, AVIC Composite Corporation Ltd, Aviation Department of the General Staff Military Representative Office in Harbin

.................. page:115-120

Effect of calcium-treatment on resistance against pitting corrosion of AH36 hull structural steel (钙处理对AH36船体钢耐点蚀性能的影响)

HU Yulong, SUN Wei, KONG Xiaodong, SU Xiaohong, College of Science, Naval University of Engineering, Navy Military Representative Department, Hudong Zhonghua Shipbuilding Company Limited

.................. page:121-128

cai liao ke xue yu gong yi zheng gao jian ze (《材料科学与工艺》征稿简则)

.................. page:129

Recommended Journals

Oriental Forum
青岛大学
1005-7110

Modern Agricultural Machinery

1674-5604

Urban Planning Forum
同济大学
1000-3363

Materials Science and Technology
中国材料研究学会哈尔滨工业大学
1005-0299

Household Appliance Technology
中国家用电器研究所中国轻工协会家用电器工程学会
1672-0172

Chinese Journal of Energetic Materials
中国工程物理研究院
1006-9941

Journal of Southwest University for Nationalities(Natural Science Edition)
西南民族大学
1003-2843

Transactions of Beijing Institute of Technology
北京理工大学
1001-0645

Measurement & Control Technology
北京长城航空测控技术研究所
1000-8829

Journal of Social Science of Jiamusi University
佳木斯大学
1007-9882