The server is under maintenance between 08:00 to 12:00 (GMT+08:00), and please visit later.
We apologize for any inconvenience caused
Login  | Sign Up  |  Oriprobe Inc. Feed
China/Asia On Demand
Journal Articles
Bookmark and Share
Contributions of the Secondary Jet to the Tangential Velocity Distribution and to the Collection Efficiency of the Fixed Guide Vane Type Axial Flow Cyclone Dust Collector
Pages: 503-509
Year: Issue:  6
Journal: Journal of Thermal Science

Keyword:  Axial Flow Cyclone Dust CollectorMaximum Tangential VelocityCut-SizeParticle Size DistributionCollection EfficiencyReynolds numberCentrifugal Effect;
Abstract: In order to control the maximum tangential velocity V?m(m/s) of the turbulent rotational air flow and the collection efficiency ηc(%) using the fly ash of the mean diameter X R50=5.57 ?m, two secondary jet nozzles were installed to the body of the axial flow cyclone dust collector with the body diameter D1=99mm. Then in order to estimate V?m(m/s), the conservation theory of the angular momentum flux with Ogawa combined vortex model was applied. The comparisons of the estimated results of V?m(m/s) with the measured results by the cylindrical Pitot-tube were shown in good agreement. And also the estimated collection efficiencies ηcth(%) basing upon the cut-size Xc(?m) which was calculated by using the estimated V? m(m/s) and also the particle size distribution R(Xp) were shown a little higher values than the experimental results due to the re-entrainment of the collected dust. The best method for adjustment of ηc(%) related to the contribution of the secondary jet flow is principally to apply the centrifugal effect ?c(1). Above stated results are described in detail.
Related Articles
No related articles found