The server is under maintenance between 08:00 to 12:00 (GMT+08:00), and please visit later.
We apologize for any inconvenience caused
Login  | Sign Up  |  Oriprobe Inc. Feed
China/Asia On Demand
Journal Articles
Laws/Policies/Regulations
Companies/Products
Bookmark and Share
Research on performance of aluminum alloy joint by laser-MIG hybrid welding
Author(s): 
Pages: 611-615
Year: Issue:  6
Journal: Laser & Infrared

Keyword:  hybrid weldingmicrostructuretensile propertymicrohardnessfracture morphology;
Abstract: After the interaction of laser-MIG and arc,grain sizes in top welding seam center are different from that in bottom welding seam center.Based on this,the effects of welding speed on the microstructure,tensile property and mi-crohardness of 6009 aluminum alloy are studied.The results show that the tensile strength and elongation of the hybrid joint increase with the increase of welding speed;the fracture position of hybrid welding transfers from welding seam to heat-affected zone(HAZ),and dimple morphologies appear in the fractures,and the mechanism of fracture is micro-porous gathered fracture;grains in the upper welding center are smaller than that in the lower welding center,and its size distribute is uniform.Moreover,the microhardness of top welding seam is greater than that of bottom,and there is welding-softened zone in HAZ,and its width is 4 to 6 mm.
Related Articles
No related articles found