The server is under maintenance between 08:00 to 12:00 (GMT+08:00), and please visit later.
We apologize for any inconvenience caused
Login  | Sign Up  |  Oriprobe Inc. Feed
China/Asia On Demand
Journal Articles
Laws/Policies/Regulations
Companies/Products
Bookmark and Share
Optimization Design of Precursor K-Charge Structure of Tandem Warhead
Author(s): 
Pages: 73-78
Year: Issue:  1
Journal: Chinese Journal of High Pressure Physics

Keyword:  K-chargetandem warheadshaped charge jetorthogonal optimizenumerical simulation;
Abstract: Aimed at the requirement of large hole diameter and deep penetration depth of tandem warhead precursor charge,by using LS-DYNA finite element software and orthogonal optimal design method,the influence law of the liner and foam structural parameters of K-charge on the formation of the shaped jet was studied.The relatively high tip velocity was gained,when the liner curvature radius was selected within a range between 90and 110mm,and the eccentricity was taken between 35and 40mm.The influence sequence of the structural parameters,including eccentricity,curvature radius, thickness,foam diameter,opening angle,and cone angle,on the jet formation indexes(tip velocity,tip and tail velocity difference)was obtained,and the optimal combination of K-charge structural parameters was acquired.The X-ray imaging and steel penetration experiments were also carried out.The experimental results show that the penetration depth and hole diameter reach 3.73and 0.36times of charge diameter,respectively,and the penetration hole is relatively homogenous.The simulation results are in good agreement with the experimental results,which provides a reference for the further study of tandem shaped charge technique.
Related Articles
No related articles found