The server is under maintenance between 08:00 to 12:00 (GMT+08:00), and please visit later.
We apologize for any inconvenience caused
Login  | Sign Up  |  Oriprobe Inc. Feed
China/Asia On Demand
Journal Articles
Laws/Policies/Regulations
Companies/Products
Bookmark and Share
Investigation on Welding Performance of Quenched and Tempered Type 700 MPa Grade High Strength Steel Plate
Author(s): 
Pages: 9-13
Year: Issue:  1
Journal: Wide and Heavy Plate

Keyword:  700 MPa调质钢焊接工艺性能;
Abstract: 从低成本700 MPa级调质中厚钢板的焊接性能着手,分析了母材的成分、组织及性能特点,研究了其焊接冷裂纹敏感性、焊接过程中的热输入量以及焊后热处理过程对试验钢焊接接头组织和性能的影响.结果表明,针对50 mm厚的700 MPa级高强度调质钢板,在中等拘束条件下,采用BHG-4M焊丝富氩混合气体保护焊、预热100℃的工艺进行焊接可以防止冷裂纹产生;在苛刻拘束条件下,最低预热温度在120℃以上才能防止裂纹产生;试验钢对焊接工艺规范有较强的适应性,焊接热输入量在8.85 ~ 24.17 kJ/cm范围内变化时,试验钢焊接接头的综合力学性能保持在较高水平.
Related Articles
No related articles found