The server is under maintenance between 08:00 to 12:00 (GMT+08:00), and please visit later.
We apologize for any inconvenience caused
Login  | Sign Up  |  Oriprobe Inc. Feed
China/Asia On Demand
Journal Articles
Bookmark and Share
DFM of Soldering Pad of QFP and DIP for Wave Soldering
Pages: 315-319,336
Year: Issue:  6
Journal: Electronics Process Technology

Keyword:  Wave solderingQFP with pitch 0.5 mmSoldering pad designSingle row of pins with pitch 1.27 mm;
Abstract: Although the surface mount technology has accounted for 90%in the electronic products, the traditional wave soldering technology is still used in the future. Mainly discusses the wave soldering technology, focus on the difficult soldering technology of single row of DIP pins with pitch 1.27 mm, and QFP with pitch 0.5 mm. The special soldering pads were designed for the two kinds of components. The normal wave soldering process parameters combining with special coating process were used to solder the experimental board, and the result is what we expected. We get the optimal pad design for QFP with pitch 0.5 mm and the good pad design for single row of DIP pins with pitch 1.27 mm based on the experiment. At the same time, the experimental result shows that the special soldering pad design is needed when QFP and DIP are soldered by wave soldering.
Related Articles
No related articles found