Effect of double inclined slotted casing treatment on centrifugal compressor performance
Author(s): TENG Jin-fang, ZHU Ming-min, QIANG Xiao-qing
Pages: 164-170
Year: 2013 Issue: 1
Journal: Journal of Aerospace Power
Keyword: 离心压气机; 机匣处理; 双倾斜壁缝式; 泄漏流; 数值仿真;
Abstract: 采用数值仿真手段研究不同倾斜方向的双倾斜壁缝式机匣处理对离心压气机性能的影响.研究结果表明:合适的机匣处理缝倾角组合有助于合理组织导叶和动叶气流角匹配关系.通过详细分析离心压气机内部流场表明:双倾斜壁缝式机匣处理方案A通过对动叶叶尖泄漏流的抽吸和重新组织,对机匣处理缝后部的低能流体抽吸并吸除,经过背腔在机匣处理缝前部重新注入相邻的叶栅流道,从而在轴向和周向控制了叶尖泄漏流的发展,改善了下游的堵塞情形,大幅度提高了压气机的稳定工作裕度.
Pages: 164-170
Year: 2013 Issue: 1
Journal: Journal of Aerospace Power
Keyword: 离心压气机; 机匣处理; 双倾斜壁缝式; 泄漏流; 数值仿真;
Abstract: 采用数值仿真手段研究不同倾斜方向的双倾斜壁缝式机匣处理对离心压气机性能的影响.研究结果表明:合适的机匣处理缝倾角组合有助于合理组织导叶和动叶气流角匹配关系.通过详细分析离心压气机内部流场表明:双倾斜壁缝式机匣处理方案A通过对动叶叶尖泄漏流的抽吸和重新组织,对机匣处理缝后部的低能流体抽吸并吸除,经过背腔在机匣处理缝前部重新注入相邻的叶栅流道,从而在轴向和周向控制了叶尖泄漏流的发展,改善了下游的堵塞情形,大幅度提高了压气机的稳定工作裕度.
Citations
- 胡良军,杨策,祁明旭,马朝臣. 离心压气机机匣处理与导叶轮缘放气的扩稳机理分析及比较 [J]. 机械工程学报 . 2009(07)
- 高鹏,楚武利,杨泳. 低速离心压气机非稳态流和机匣处理的数值分析 [J]. 推进技术 . 2007(01)
- 楚武利,朱俊强,刘志伟. 折线斜缝式机匣处理的实验研究及机理分析 [J]. 航空动力学报 . 1999(03)
- 杜辉,朱俊强,楚武利,刘志伟. “凹槽导流片式”机匣处理的结构尺寸优化研究 [J]. 推进技术 . 1998(01)
- 《航空发动机设计手册》总编委会编.航空发动机设计手册[M]. 航空工业出版社, 1999
- Hathaway M D,Chriss R M,Wood J R,et al. Experimental and Computational Investigation of the NASA Low-Speed Centrifugal Compressor Flow Field . Transactions of the ASME, Journal of Turbomachinaery . 1993
- Koch C C. Experimental Evaluation of Outer Case Blowing or Bleeding of Single Stage Axial Flow Compressor-PartⅥ-Final Report . NASA CR-54592 . 1970
- Behnam H Beheshti,Joao A Teixeira,Paul C. lvey,Kaveh Ghorbanian,Bijan Farhanieh. Parametric Study of Tip Clearance-Casing Treatment on Performance and Stability of a Transonic Axial Compressor . Journal of Turbomachinery . 2004
- Lu, X. G,Chu, W. L,Zhu, J. Q,Zhang, Y. F. Numerical investigations of the coupled flow through a subsonic compressor rotor and axial skewed slot . Journal of Turbomachinery . 2009
- Baily E E. Effects of grooved casing treatment on the flow range capability of a single stage axial-flow compressor . . 1972
- Chriss R M,Hathaway M D,Wood J R. Experimental and Computational Results From the NASA Lewis Low-Speed Centrifugal Impeller at Design and Part-Flow Conditions . Journal of Turbomachinery . 1996
- VOGES M,SCHNELL R,WILLERT C.et al. Investigation of blade tip interaction with casing treat-ment in a transonic compressor-Part I:Particle image velocimetry . Journal of Turbomachinery-Transa-ctions of the ASME . 2011
- Sun X F. On the relation between the inception of rotating stall and casing treatment . AIAA-1996-2579 . 1996
- ZHU J Q,CHU W L. The effects of bend skewed groove casing treatment on performance and flow field near endwall of an axial compressor . AIAA Paper, 2005-0809 .
- Emmrich R,Hnen H,Niehuis R. Time resolved experi-mental investigations of an axial compressor with casingtreatment . Journal of Turbomachinery . 2009
Related Articles