The server is under maintenance between 08:00 to 12:00 (GMT+08:00), and please visit later.
We apologize for any inconvenience caused
Login  | Sign Up  |  Oriprobe Inc. Feed
China/Asia On Demand
Journal Articles
Laws/Policies/Regulations
Companies/Products
Bookmark and Share
Properties of the selective laser sintered specimens of nylon12-coated aluminum powders
Author(s): 
Pages: 608-611
Year: Issue:  5
Journal: Materials Science and Technology

Keyword:  GetLinkList(KeywordFilter('选择性激光烧结尼龙12铝粉溶剂沉淀法')'kw''CJFD');
Abstract: 常用的机械混合法很难将尼龙12和金属粉末材料混合均匀,容易出现偏聚,因而会造成选择性激光烧结(SLS)成形件中存在局部强度弱点、翘曲等缺陷.为此,提出了通过溶液沉淀法制备SLS成形用尼龙12覆膜铝粉,利用扫描电镜观察了尼龙12覆膜铝粉及烧结件断口的微观形貌,研究了铝粉含量及粒径对SLS成形件性能的影响.结果表明:尼龙12均匀地包覆在铝粉表面,无裸露铝粉颗粒存在,表明成功制备得到了尼龙12覆膜铝粉材料;当铝粉含量从0增大到50%时,烧结件的热变形温度、拉伸强度、弯曲强度、弯曲模量及硬度比纯尼龙烧结件分别提高了87℃、10.4%、62.1%、122.3%及70.4%;烧结件的拉伸强度、断裂伸长率及冲击强度均随着铝粉平均粒径的减小而增大.
Related Articles
No related articles found